Vet Implants
110 Vet Implants products — diagnostics, patient-care equipment, instruments and accessories.
Orthopaedic Implants for Veterinary Surgery
Vet implants provide the internal fixation hardware used in animal fracture repair, corrective osteotomy and joint stabilisation. Correctly selected plates, screws, pins and wires re-establish anatomical alignment and mechanical stability, promoting early weight-bearing and dependable bony union in companion and large-animal patients.
This range spans locking and non-locking plates, cortical and cancellous screws, fixation pins and Kirschner wires across small- and large-breed sizes. Implants are commonly manufactured in surgical stainless steel or titanium alloy for biocompatibility and corrosion resistance, and are supplied for steam sterilisation prior to surgical use.
Showing 49–72 of 110
2.4mm Reconstruction Straight Plate 25 Holes
Reconstruction plate with notched edges between holes that allow on-bench bending in three dimensions — ideal for complex anatomical contouring..
2.4mm Self-Tapping Screw
Self-tapping bone screw with hex drive — no separate tap step required, reducing implant time and intra-op steps..
2.4mm Straight Cuttable Plate 22 Holes
Long-strip cuttable plate — the surgeon trims to the required length intra-operatively, eliminating the need to stock every hole count..
2.4mm T-Plate 2+8 Holes
T-plate for articular and juxta-articular fractures where a transverse limb provides epiphyseal screw purchase and the longitudinal limb engages the diaphysis..
2.4mm X-Type Plate 4 Holes
X-type plate for fixation of short metaphyseal and articular fragments where a four-point screw pattern is required for rotational stability..
2.4mm X-Type Plate 4 Holes
X-type plate for fixation of short metaphyseal and articular fragments where a four-point screw pattern is required for rotational stability..
2.4mm X-Type Plate 6 Holes
X-type plate for fixation of short metaphyseal and articular fragments where a four-point screw pattern is required for rotational stability..
2.7 3.5mm Distal Femur Plate
Anatomically contoured distal-femur plate for supracondylar and intra-articular fractures of the canine and feline femur.
2.7mm Acetabular Plate 6 Holes
Pre-shaped acetabular plate for fracture fixation of the canine and feline pelvis.
2.7mm Bridging Plate 8 Holes
Bridging plate for comminuted diaphyseal fractures where direct anatomical reduction is not feasible.
2.7mm Distal Femur Plate A
Anatomically contoured distal-femur plate for supracondylar and intra-articular fractures of the canine and feline femur.
2.7mm Distal Femur Plate B
Anatomically contoured distal-femur plate for supracondylar and intra-articular fractures of the canine and feline femur.
2.7mm LC-DCP Straight Plate 10 Holes
LC-DCP (Limited Contact Dynamic Compression Plate) for fracture fixation in small-animal orthopaedic surgery.
2.7mm LC-DCP Straight Plate 12 Holes
LC-DCP (Limited Contact Dynamic Compression Plate) for fracture fixation in small-animal orthopaedic surgery.
2.7mm LC-DCP Straight Plate 4 Holes
LC-DCP (Limited Contact Dynamic Compression Plate) for fracture fixation in small-animal orthopaedic surgery.
2.7mm LC-DCP Straight Plate 4,5,6,7,8,9,10,12 Holes
LC-DCP (Limited Contact Dynamic Compression Plate) for fracture fixation in small-animal orthopaedic surgery.
2.7mm LC-DCP Straight Plate 5 Holes
LC-DCP (Limited Contact Dynamic Compression Plate) for fracture fixation in small-animal orthopaedic surgery.
2.7mm LC-DCP Straight Plate 6 Holes
LC-DCP (Limited Contact Dynamic Compression Plate) for fracture fixation in small-animal orthopaedic surgery.
2.7mm LC-DCP Straight Plate 7 Holes
LC-DCP (Limited Contact Dynamic Compression Plate) for fracture fixation in small-animal orthopaedic surgery.
2.7mm LC-DCP Straight Plate 8 Holes
LC-DCP (Limited Contact Dynamic Compression Plate) for fracture fixation in small-animal orthopaedic surgery.
2.7mm LC-DCP Straight Plate 9 Holes
LC-DCP (Limited Contact Dynamic Compression Plate) for fracture fixation in small-animal orthopaedic surgery.
2.7mm Reconstruction Straight Plate 20 Holes
Reconstruction plate with notched edges between holes that allow on-bench bending in three dimensions — ideal for complex anatomical contouring..
2.7mm Self-Tapping Screw
Self-tapping bone screw with hex drive — no separate tap step required, reducing implant time and intra-op steps..
2.7mm T-Plate 2+4 Holes
T-plate for articular and juxta-articular fractures where a transverse limb provides epiphyseal screw purchase and the longitudinal limb engages the diaphysis..
Related topics
- locking plate(110)
- vet plates(110)
- vet screws(110)
- vet titanium plate(110)
- veterinary implants(110)
- vet instrumentation(96)
- vet instruments(96)
- vet ortho(96)
- vet orthopaedics(96)
- vet orthopedics(96)
- veterinary instrumentation(96)
- veterinary orthopedics(96)
- vetinst(96)
- orthoprovet(21)
- instruments(12)
- orthopaedic instrument sets(12)
- veterinary surgery(11)
- orthopedic drill(10)
Configuration assistance
Can't find what you're looking for?
A sales engineer scopes quantities, sizing, instruments and compliance paperwork with you and replies within one business day. No commitment, no hard-sell — just a quote you can hand to procurement.